Making Folded Documents

For those Xerox Nuvera systems that include a Multi-Function Finisher (MFF), you will have C and Z-Folding capabilities for 8.5 X11 inch and A4 stock. All that is required is either an original document or print-ready file that is formatted for this type of output.

For details about the Multi-Function Finisher, see Finisher Capabilities.

 

To make a C-Folded document while copying

  1. Place the original document in the Document Feeder, short edge feed, side one face up with the top of sheet toward the back of the scanner.
  2. Select Copy Services.
  3. Select Clear All.
  4. If needed, add 8.5x11” white stock to tray 3 or 4. Place stock to short edge feed. Verify tray programming.
  5. Program Job properties. For example:
    1. In the user interface on the Basic tab, select Trifold C from the Finishing menu.
    2. Make any other job programming choices.
  6. When satisfied with your settings, click <Copy>.

To make a Z-Folded document while copying

  1. Place the original document in the Document Feeder, short edge feed, side one face up with the top of sheet toward the back of the scanner.
  2. Select Copy Services.
  3. Select Clear All.
  4. If needed, add 8.5x11” white stock to tray 3 or 4. Place stock to short edge feed. Verify tray programming.
  5. Program Job properties. For example:
    1. In the user interface on the Basic tab, select Trifold Z from the Finishing menu.
    2. Make any other job programming choices.
  6. When satisfied with your settings, click <Copy>.

To make a Folded document while printing

The steps for printing a Folded document are essentially the same as they are for copying. The only difference is that you will browse to find the print-ready file at the Xerox Nuvera.

For details on printing from the CD ROM drive, see Printing From the Media Drive.

For details on printing from your PC, see Printing a Job From Your PC.