Restarting the System
If your machine performance becomes degraded, or it ceases to function correctly for any reason, executing a Restart will usually restore correct function. If the problem continues, contact your Xerox representative.
To restart the system
There are two ways to restart the Xerox Nuvera:
- Method A Restart: a shutdown and restart of the DocuSP software.
- Method B Shutdown : a machine shutdown.
 |
TIP: If system performance becomes degraded, try Method A first. If this solves performance problems, don't perform Method B. If system performance is still poor, perform Method B. |
Method A: Restart the system
- In the user interface, click [System: Restart].
- In a few moments, the system will begin an orderly shutdown of services.
- The system will then begin an orderly startup. Wait several minutes for the system to load all services before clicking anywhere in the user interface.
Method B: Shut down the system
- In the user interface, click [System: Shutdown].
- Click [Yes] to shut down the system in an orderly fashion, after all scheduled jobs are processed.
- Click[ Interrupt] to shut down the system without completing the processing of current jobs.
- Click [No] to return to the user interface.
- In a few moments, the system will begin an orderly shutdown.
- Once the system has completely shutdown, wait 30 seconds and power on the system by pressing (I) on the power switch located on the lower right corner of the control console.
For details on powering on the system, see Powering On the Xerox Nuvera.
