Xerox recommends that you change the default system administrator password after you configure the printer. Be sure to store the password in a secure location. The default password is 1111.

Change the password from the Embedded Web Server:

  1. Login as System Administrator to the Embedded Web Server. See the Related Content section for additional information.
  2. In the Embedded Web Server, click Properties > Security.
  3. Click Password Policies > Admin Password.
  4. Type the old password.
  5. Type the new password, then type the password again to verify.
  6. Click Apply.
  7. Logout of System Administrator mode. See the Related Content section for additional information.

Change the system administrator password at the control panel:

  1. Login as System Administrator at the control panel. See the Related Content section for additional information.
  2. At the control panel touch screen, touch Device, then touch Tools.
  3. Touch Security Settings > Change Admin Password.
  4. If changing the password, type the old password.
  5. Type the new password, then type the password again to verify.
  6. Touch OK.
  7. Logout of System Administrator mode. See the Related Content section for additional information.