For details on supported paper sizes, click on Paper / Media Specifications.

You can print labels from the following trays only:

• Trays 1–4

 WARNING: Printing labels from the following trays can cause misfeeds and other print problems:

• Tray 5 - Bypass Tray

• Tray 6 - High Capacity Feeder

Guidelines for Printing Labels

• Use labels designed for laser printing.

• Do not use vinyl labels.

• Do not feed a sheet of labels through the printer more than once.

• Do not use dry gum labels.

• Print only on one side of the sheet of labels. Use full sheet labels only.

• Store unused labels flat in their original packaging. Leave the sheets of labels inside the original packaging until ready to use. Return any unused sheets of labels to the original packaging and reseal it.

• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing them in extreme conditions can cause print-quality problems or cause them to jam in the printer.

• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and jam in the printer.

• In the print driver software, select Label as the paper type.

• Before loading labels, remove all other paper from the tray.

CAUTION: Do not use any sheet where labels are missing, curled, or pulled away from the backing sheet. It could damage the printer.

Load Labels

Note: Load labels only in trays 1–4.

1. Pull out the tray until it stops.
   
   
   
   

2. Ensure that the paper guides are set in the correct position for the size of labels you are loading.

3. Remove any paper that is a different size or type.

4. To move out the length or width paper guide, release the guide lock, then slide out the length or width paper guide.
   
   
   
   

5. Load the labels in the tray.

   • For long-edge feed, insert labels face up with the top edge toward the front.
     
     
     
     

   • For short-edge feed, insert labels face up with the top edge toward the right.
     
     
     
     

     Note: Do not load paper above the maximum fill line. Overfilling can cause paper jams.
     
     

6. Adjust the length and width paper guides to fit the labels.
   
   
   
   

7. Slide the tray back into the printer.
   
   
   
   

8. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is set to Labels.

   
   Note: To change the paper settings when the tray is set to Dedicated mode, click on Configure, Modify or Verify Paper Tray Settings (Fully Adjustable/Dedicated, Priority, Auto Selection).
   
   

9. To confirm the settings, touch Confirm.

10. To return to the Home screen, press the Home button.