You can print envelopes from Tray 5. When the optional Envelope Tray is installed, you can print envelopes from Tray 1.  For supported envelope sizes, click on Paper / Media Specifications.

Follow the instructions for the tray being used. 

Guidelines for Printing Envelopes

• Use only paper envelopes.

• Do not use envelopes with windows or metal clasps.

• Print quality depends on the quality and construction of the envelopes. If you do not get the desired results, try another envelope brand.

• Maintain constant temperatures and relative humidity.  For additional information, click on Environmental Specifications.

• Store unused envelopes in their packaging to avoid excess moisture and dryness which can affect print quality and cause wrinkling. Excessive moisture can cause the envelopes to seal before or during printing.

• Remove air bubbles from the envelopes before loading them into the tray by setting a heavy book on top of the envelopes.

• In the print driver software, select Envelope as the paper type.

• Do not use padded envelopes. Use envelopes that lie flat on a surface.

• Do not use envelopes with heat-activated glue.

• Do not use envelopes with press-and-seal flaps.

Load Envelopes in the Bypass Tray

To load envelopes in the Bypass Tray:

1. Open the Bypass Tray.
   
   
   
   

2. Move the width guides to the edges of the tray.
   
   
   
   

   Note: If you do not load envelopes in the Bypass Tray right after they are removed from the packaging, they can bulge. To avoid jams, flatten the envelopes.

   
   
   
   
   

3. Load envelopes in the tray.

   • For envelopes with the flap on a long edge, load envelopes face down with the flaps closed, and flaps toward the right.
     
     
     
     

   • For envelopes with a self-seal flap on a short edge, load envelopes face down with the flaps closed, and flaps toward the right.
     
     
     
     

   • For envelopes with a non-adhesive flap on a short edge, load envelopes face down with the flaps open, and flaps toward the left.
     
     
     
     

   Note: For envelopes to print correctly, when you load envelopes with the flaps open, in the print driver, set the orientation as needed. To flip the images, in the print driver, select Rotate Image 180 Degrees.
   
   

4. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is set to Envelope.

5. To confirm the settings, touch Confirm.

Load Envelopes in the Envelope Tray

You can use the optional Envelope Tray in place of Tray 1. The Envelope Tray is a dedicated tray. For supported envelope sizes, refer to the paper/media specifications.  

Note: For information on installing the optional Envelope Tray,  click on Install and Enable the Optional Tray 1 Envelope Tray.

To load the Envelope Tray:

1. Pull out the Envelope Tray until it stops.
   
   
   
   

2. Load the envelopes in the tray, face up with the flaps closed, and flaps toward the left.
   
   
   
   
   

   Note: For 6 3/4 Envelopes and short-edge feed custom envelope sizes, load envelopes with the flaps closed, and flaps toward the front.
   
   

3. Adjust the paper guides so that they rest lightly against the edges of the envelopes. Ensure that the maximum fill line is visible or that there are no more than 50 envelopes loaded in the tray.

4. Close the tray.
   
   
   
   

5. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is set to Envelope.

6. To confirm the settings, touch Confirm.