Install Optional Software Features

When you purchase an optional software feature, to enable it, provide a feature installation key. Some features come with an activation code that you use to request a feature installation key. Go to the Xerox Software Activation Portal website at www.xeroxlicensing.xerox.com/fik to enter the activation code. The website generates a feature installation key that you can use to enable the feature.

You can also install optional software features by sending a print file. You can install features on multiple printers by sending a formatted .csv file as a print job to the printers. A Xerox representative creates this file and provides installation instructions.

NOTE: The settings may be configured from the touch screen or through the Embedded Web Server.  Select your preferred method to configure these settings.

Install a Software Feature in the Embedded Web Server:

1. Access the Embedded Web Server and login as Administrator.

2. In the Embedded Web Server, click Properties > General Setup.

3. Click Feature Installation.

4. For Feature Installation Key Entry, click Enter Installation Key, or for the feature you want to install, click Install.

5. Type the key.

6. Click Apply.

7. Logout of System Administrator mode. 

Install a Software Feature From the Control Panel: 

1. Login as System Administrator from the Control Panel.
   

2. Touch Device > Tools.

3. Touch Device Settings > General > Feature Installation.

4. Touch the Enter Feature Installation Key field then enter the key using keyboard on touch screen then touch OK.

5. Touch OK.

6. Touch X to exit.

7. Logout as System Administrator from the Control Panel.