RSS RAP - Streaks/Lines (LE/TE)
- Product support for
- Xerox Versant 2100 Press
- Article ID
- KB0014351
- Published
- 2019-07-01
Streaks/Lines (LE/TE) – White or colored streaks appear on the image randomly or in same position. Usually medium-width streaks of (or shifts in) color most noticeable in low density (40-60%) halftone areas of the print. Streaks are generally shorter than lines and are nonuniform width along their length. Streaks may have a more ragged or fuzzy appearance than lines. | ||
step | Check | Corrective Action |
1 | If the SW is not at current versions:
Continue with corrective actions, but schedule a service call to upgrade SW. | |
2 | Check the consumable status for the Suction Filter. Is the Suction Filter over threshold? | (Yes) Replace the Suction Filter Go to step 3. (No) Go to step 3. |
3 | Is the defect resolved? | (No) Go to step 4. (Yes) Call complete. |
4 | Move the Drum Cartridge from a color showing the defect to a color that does not show the defect. The defect moves with the Drum Cartridge? | (No) Go to step 5. The problem is not the Drum. (Yes) Replace the Drum Cartridge with defects. |
5 | Is the problem Edge streaks? | (No) Go to step 6. (Yes) Run the Clean Fuser Assembly routine. Is the defect resolved? (Yes) Call complete. (No) Go to step 6. |
6 | Adjust the FWA Automatic Density Uniformity Is the defect resolved? | (Yes) Call complete. (No) Call for service |
