Document Feeder & Scanner Specifications
The scanner includes the Simultaneous Duplex Document Feeder ("Document Feeder") and the Document Glass (or "Platen").
The Document Feeder uses a Constant Velocity Transport (CVT) to scan each page as it passes the stationary scan module. The Document Feeder can scan both sides of a page at once (hence the name "Simultaneous Duplex"), using a second CVT to move the document past the second scan module. This reduces the time required for copying or scanning 2-sided originals.
The Document Glass provides a means for scanning documents that cannot be fed through the Document Feeder, such as fragile, bound, and extra large documents. The original is placed face down on the Document Glass and the scan module passes under the Document Glass.
For details on proper usage of the Document Feeder, see Using the Document Feeder.
Document Feeder Paper Capacities and Capabilities
Item |
Specification |
Maximum paper dimensions |
11 x 17 inches (279.4 mm x 432 mm) (see NOTE below) |
Minimum paper dimensions |
5.5 x 8.5 inches (140 mm x 216 mm) |
Paper capacity |
300 sheets (20 lb. bond, 75 gsm weight) Weight 13 lb. bond to 113 lb. index (49 to 250 gsm) |
Throughput |
8-bit Gray (256 shades) at 600 x 600 dpi 120 images per minute two-sided 8.5 x 11"/A4 - 60 sheets per minute |
 |
NOTE: A5 and Statement stock should be fed SEF(Short Edge Feed). LEF (Long Edge Feed) of A5 and Statement stock is not supported by the Document Handler. |
|
NOTE: A 12x18 inch original will travel through the Document Feeder, but some information on the output may be lost. To ensure all image information from a 12 x 18 inch original is captured, use the Document Glass. |
