Replacing the Dry Ink (Toner) Container

Replace the Dry Ink container after every 110,000 images.

When the machine has reached the limit set for the Dry Ink container, an alert will appear in the system messages portion of the UI. Double-clicking the alert will launch a new window, giving details about the action needed.

The Digital Production System has two (2) Dry Ink Containers. You can replace the empty container while the system is running, providing the 2nd container contains toner.

The procedures for changing the cartridges is the same for both cartridges.

CAUTION! Make sure you install a valid toner cartridge. The LEX (regular) cartridge has a WHITE cap and the MICR cartridge has a RED cap.

To replace Dry Ink Container

Double-click the system alert to see the location of the Dry Ink Container, details on the action needed, and instructions on how and where to return the used Dry Ink Container.

See Contacting Xerox to get the correct part number for this Dry Ink Container.

NOTE: If you install an invalid toner cartridge, a fault code will ask you to "remove the invalid toner container" .

1. Open the front access covers and identify the correct container.
2. Move Dry Ink Container latch to the left.
3. Remove the used container. This is accomplished by pulling the container outward. Keep the output hole of the old container pointing up to avoid spilling any residual dry ink.
4. Prepare the new container for installation. Before removing the orange seal, rock the container end to end five times. This mixes up any dry ink that may have settled.
5. Remove the orange seal.
6. Insert the new container. Make sure:
   • the intake core punctures the container's inner seal
   • the container is completely seated
   • the arrow on the container lines up with the arrow on the printer housing
7. Package the used container for return. Use the box and prepaid return label to return the old unit to Xerox.