Cleaning the Keyboard

Depending on the environment where your system is placed, keeping the keyboard free of dirt and other contaminants will assure quick and accurate job programming.

To clean the keyboard

caution: possibility of damage to equipment if procedure not followed.

CAUTION!
To avoid damage to the machine, do not pour or spray water or cleaner directly into the Xerox Nuvera. Do not use any abrasive cleaners to clean the Xerox Nuvera.

Cleaning the keyboard can be performed fairly quickly. It is recommended that you perform the following actions before the machine is started, or after the machine is completely shut down for the day.

  1. Over a waste container, turn the keyboard upside down and gently shake to allow any large contaminant particles to fall out.
  2. Using canned air (commonly found at office supply stores), direct the air stream directly at the keys, blowing away any remaining dust and other contaminants.
  3. Using a lightly moistened cloth, gently wipe down the keyboard; including the keys and any surface where contact occurs.