Stapler Specifications

Basic Finishing Module Stapler

For more information, see Basic Finishing Module Specification

MultiFunction Finisher

If the Xerox Nuvera is equipped with a MultiFunction Finisher, this finisher includes two stapling systems:

• Main Stapler
• Booklet Stapler

Before using any of the staplers on the Xerox Nuvera, take the time to learn about their capabilities and capacities.

Document Size Requirements

Short Edge size range: 8 inches to 12 inches

Long Edge size range: 6.7 inches to 18 inches

Stapling Limit

The Main Stapler will accommodate either a 50 Sheet Stapler Cartridge or a 100 Sheet Stapler Cartridge. The maximum staple limit is either 50 sheets of 80gsm (20lb.) paper or 100 sheets of 80gsm (20lb.) paper Papers of heavier weights or larger sizes will reduce the maximum staple limits, accordingly.

Staple Cartridge Limitation

The machine software currently does not distinguish between the 50 Sheet Staple Cartridge and the 100 Sheet Staple Cartridge. This means that if the 50 Sheet Staple Cartridge is loaded in the machine, and a job with more than 50 sheets is sent to be stapled, a mis-staple or stapler jam will probably occur. If the 50 Sheet Staple Cartridge is used, it is the responsibility of the operator to ensure that jobs exceeding 50 sheets are not submitted for stapling.

Stock Weight / Maximum Sheets

Stapler Maintenance

If either of the staplers runs out of staples, or jams, see Clearing Staple Jams or Replacing Staples.