Cleaning the 'Optical' Mouse

Dirt and dust settling on the Xerox Nuvera machine can work its way into the mouse, causing the user difficulty in efficiently navigating the controls on the machine display.

Depending on your work environment, you may need to perform these steps frequently.

To clean the 'optical' mouse

caution: possibility of damage to equipment if procedure not followed.

CAUTION!
To avoid damage to the machine, do not pour or spray water or cleaner directly into the Xerox Nuvera. Do not use any abrasive cleaners to clean the Xerox Nuvera.

  1. With a damp lint-free cloth, clean the exterior of the entire mouse. Be sure to clean the four pads on the bottom of the mouse that come in contact with the surface your mouse travels on.
  2. With a damp lint-free cloth, clean the center scrolling wheel. Roll the wheel with your finger to clean all exposed surfaces.
  3. Pick up the mouse and turn it over. Using a damp cotton swab, clean the plastic area in front of where the red optical light is emitted.
  4. Use a dry cotton swab to remove any remaining moisture from step 3.
  5. With a damp lint-free cloth, wipe off the surface (mouse pad or directly on the Xerox Nuvera) your mouse travels on.