Using the Document Feeder

NOTE: Copying and scanning jobs is not available on the Xerox Nuvera 288 Digital Perfecting System.

The Xerox Nuvera is equipped with a Document Feeder, allowing you to quickly scan large document sets into the system for processing.

For more information on the capabilities of the Document Feeder, see Document Feeder and Scanner Specifications.

To load the Document Feeder

NOTE: To ensure all image information from a 12 x 18 inch original is captured, use the Document Glass.

NOTE: Follow the steps below to avoid misfeeds and/or skewed output. The document feeder side guides must be positioned correctly to avoid misaligned copies or scans.

1. Remove any staples, paper clips, etc. that may be binding the paper set.
2. Move the side guides outward as far as they will go.
3. Place the document set to be scanned or copied face up in the center of the document feeder input tray. Make sure the document set is neatly stacked to avoid skewing. For more information on paper loading (type and feed direction), see Document Feeder and Scanner Specifications.
4. Move the side guides inward. Make sure the paper guides are touching both sides of the paper stack. Failure to do so may result in sheets skewing and skewed images on copies or scans.
5. Make any programming choices in the user interface.
6. Click <Start>.

If a jam occurs in the Document Feeder, see Clearing Paper Jams in the Document Feeder.