Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Reset the Printer Settings to Factory Defaults

Product support for
VersaLink C7120/C7125/C7130 Color Multifunction Printer
Article ID
KB0136539
Published
2021-12-07

NOTE: Use of this process will result in erasure of *ALL* customer data and configuration on the device.  Use with caution.

The non-volatile memory (NVRAM) stores printer settings, even after the power is turned off. The Reset to Factory Defaults feature erases all settings and returns the printer to original factory state. All jobs, presets, Apps, and device settings are reset. If the printer includes a hard disk, the disk is reinitialized. When complete, the printer restarts, then displays the Install Wizard.

Note: Upgrading to PL6 (XX.5X.XX) does not change the administrator password. If you reset to the device to factory defaults, the administrator password changes to the device serial number for versions PL6 (XX.5X.XX) or later of the software.

To reset the printer to factory defaults:

  1. At the printer control panel, log in as administrator (if necessary), and then press the Home button.

  2. Touch Device > Resets > Reset to Factory Defaults.

  3. At the prompt, touch Reset.

  4. When the process is complete, the printer restarts automatically.