Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Use the Xerox XLS Automatic Feeding Kit

Product support for
Xerox Iridesse Production Press
Article ID
KB0370636
Published
2020-12-01

The optional Xerox XLS Automatic Feeding Kit fluffs the media in the Multi-Sheet Inserter using blower fans. The Xerox XLS Automatic Feeding Kit can improve sheet feed accuracy for long media and heavyweight media.

If the power switch for the Xerox XLS Automatic Feeding Kit is in the On position, when you add media to the Multi-Sheet Inserter, the blower fans power on automatically.

Xerox XLS Automatic Feeding Kit components:

  1. Power Switch for the Xerox XLS Automatic Feeding Kit



  2. Blower Fans



  3. Speed Dial



  1. To power on the Xerox XLS Automatic Feeding Kit, move the power switch to the On position. The power switch is located on the rear side of the Multi-Sheet Inserter tray.

  2. Load media into the Multi-Sheet Inserter tray. The blower fans power on automatically.

  3. To adjust the blower fan speed, turn the dial to the appropriate speed for the weight of the media.

Blower Fan Speed

Media Weight Supported

 

Less than 100 g/m2

 

100–200 g/m2

 

More than 200 g/m2

Note: When the Xerox XLS Automatic Feeding Kit is not in use, to ensure that the blower fans power off, remove all material from the Multi-Sheet Inserter tray.

Note: Whenever you power off the press, Xerox recommends that you also power off the Xerox XLS Automatic Feeding Kit using its power switch.