Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Load Paper in the Post-Process Inserter

Product support for
PrimeLink C9065/C9070 Printer
Article ID
KB0383980
Published
2019-10-01

The Post-Process Inserter is a standard component of the Standard Finisher and Standard Finisher with Booklet Maker. The Post-Process Inserter is used to load blank or pre-printed paper that is used for separators and covers. The Inserter holds a maximum of 200 sheets.

  1. Remove any paper that remains loaded in the Inserter.

  2. Hold the center of the paper guides and slide them to the needed paper size.

  3. Load the paper, aligning it to the front of the tray.

  4. If the paper is pre-printed, load the paper with the printed side facing up, and the tab side positioned to enter the printer first.

  5. After stock is loaded into the Post-Process Inserter, a screen can appear asking you to change or confirm the type and size of the stock. To continue, confirm that the displayed paper size and stock are correct.

  6. If you changed the paper type, select an option on the control panel touch screen:

    • To choose paper size, type, or color, touch Paper Supply.

    • To choose a specific paper type, touch Paper Catalog, then select the paper.

  7. Touch Save, then touch Confirm.

  8. If you did not change the paper type, touch Cancel to retain the previous settings.