Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Replace Automatic Document Feed (DADF) Rollers and Separator

Product support for
VersaLink B400 Printer, VersaLink B405 Multifunction Printer
Article ID
KB0116636
Published
2022-03-10

Note: To perform this procedure, the Automatic Document Feed (DADF) Rollers and Separator are required, contact support. The kit contains all the required items for replacing the feed rolls.

  1. Open the Document Feeder Cover.

    open document feeder cover

  2. Lift and Rotate the locking tab on each end of the roller assembly so the tabs point toward you. 

    Rotate the locking Tab

  3. While holding both tabs, remove the Feed Roller from the cover.

  4. To install new Feed Roller, slide it into the cover.

  5. Rotate the left hook until the tab latches into place. Then rotate the right tab up to latch it into place.

    Rotate the hook

  6. To remove the Separator Cover Assembly, push and lift the front edge of the assembly.

  7. Insert the new Separator Cover Assembly.

  8. Close the Feeder Top Cover.