Fault Code 012-122: Compile Exit Sensor Off Jam
- Product support for
- Xerox Versant 180 Press, Xerox Versant 280 Press, Xerox Versant 80 Press
- Article ID
- KB0015540
- Published
- 2020-11-02
Power off the printer with the power switch on the blue console panel.
Open the printer front door and power off using the switch on the right side.
Unplug the finisher power cord for 1 minute.
Plug in the finisher power cord.
Open the finisher front door and leave it open during power on.
Power on the printer using the switch inside the front door, then close the door.
Power on the printer using the switch on the blue console panel.
Close the finisher door when the machine prompts you to close it.
Run a job to test solution.
If the problem persists, contact support.