Clean the Terminals on the Required Toner Cartridge(s) CRUM

NOTE: To know which cartridge to perform the action on, make note of the cartridge specified in the article title.

CAUTION: Do not use warm water or cleaning solvents to remove Toner from your skin or clothing. This will set the Toner and make it difficult to remove. If any Toner gets on your skin or clothing, use a brush to remove the Toner, or wash it off with cold water and mild soap.

WARNING: Do not perform this procedure while the printer is copying or printing.

1. If necessary, unlock and open the Front Security Door.
   
   
   
   

2. Open the Front Cover of the printer and locate the Toner Cartridges.
   
   
   
   

3. As a precaution, place a few sheets of paper on the floor, under the Toner Cartridge area, to catch any Toner that may spill.

4. Grasp under the lip of the Toner Cartridge and then pull the cartridge straight out of the printer.
   
   
   
   

5. Place it on a flat surface and then clean the terminal contacts on the end of the cartridge with a clean, dry cloth.

6. Hold the new cartridge with the arrow facing up, then push the cartridge into the printer slowly until it stops.
   
   
   
   

7. Push gently on the Toner Cartridge to ensure that it is seated properly.

8. Close the Front Cover.
   

9. If necessary, close and lock the Front Security Door.