Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

How To Enable or Disable Continuously Allow Printing to Custom Size Paper

Product support for
WorkCentre 7220/7225, WorkCentre 7220i/7225i
Article ID
KB0230529
Published
2021-04-02

NOTE: This setting affects whether continuous custom size paper is allowed or not. Disabling this setting will cause print jobs to be printed on supported paper sizes only.

Example: Printing a Document to a paper size of 8.5x10.5 will result in your document printing on 8.5x11 if the specific requested customer size paper is not loaded and available in a tray.

  1. Open a Web Browser.

  2. Enter the IP address of the Xerox Printer in the address bar of the Web Browser as shown in the example below to access the hidden page.

    NOTE: The address is case sensitive; therefore, all letters must be in upper or lower case characters as shown.

    Example: https://IP Address/diagnostics/customSizeAllowed.php
    Replace the words IP Address in the example with the actual IP Address of the Xerox Printer.

  3. Select Enabled to the right of Media Selection For Print Jobs / Custom Size Allowed.

  4. Select Apply.

  5. You may now close the Web Browser.