How To Install Fonts Using the Xerox Font Management Utility

NOTE: This Article assumes that the Xerox Font Management Utility has already been downloaded and installed from the Xerox Support Website.

NOTE: The Xerox Font Management Utility must be run from a Microsoft Windows Operating System.

Launch the Application and Add a Printer:

Open the Start Menu.
Open the Xerox Font Management Utility program folder.
Launch the Xerox Font Management Utility.
Select the Add Printer icon.

NOTE: The Utility will automatically detect a list of Xerox printers on the local network. If the Printer cannot be found, select the Gear icon to perform an Advanced Search by IP Address. If the IP Address of the printer is unknown, it can be located by Printing a Configuration Report from the device.
Select the Required Xerox Printer.
Select OK to Add the Printer.

Install the Font File:

Select the Add Font Icon. A list of Fonts locally installed on the PC will appear.
Select the Font to be added. Multiple Fonts can be selected by holding the CTRL key while selecting fonts.

NOTE: If the required Font cannot be found, use the Magnifying Glass icon to change the search directory on the Windows PC. The default Search directory is C:\Windows\Fonts\.
Select OK to add the Fonts.
Select Send to transfer the Fonts to the Printer.
Select Close to Exit the Utility.

NOTE: If an error was reported during the transfer process, make sure the Font selected is compatible with the device.