Lines or Streaks on Copies Using the Document Feeder
- Product support for
- AltaLink C8030 / C8035 / C8045 / C8055 / C8070 Color Multifunction Printer, Xerox EC8036 / EC8056 Color Multifunction Printer
- Article ID
- KB0028398
- Published
- 2023-11-08
Image Quality Example of Smears, Smudges or Streaks
For Image Quality issues besure toUse Originals in Good Condition,Ensure the Paper Moisture Content Level is Not Too High or Too Low,Ensure the Paper is Within Specification,Use a New Ream of Paper,Flip the Paper Over and Flex the Paper in the Required Paper Tray(s),Make Sure the Paper is Not Loaded Above the Maximum Fill Line in the Paper Tray,Make Sure the Paper Tray Guides are Against the Edges of the Paper and Locked Into Position, if Using a Standard Size Paper,Make Sure the Paper Tray Settings are Properly Configured and Adjust, as Required,and follow thePrint Quality Maintenance Guidelines.
How to clean the CVT glass
Line is only on the side 2 of the Duplex Scan, Clean the Second- Side Scanning Lens Assembly.Power Off the Printer, Check the Scanner Cable, Wait Two Minutes, and Then Power On the Printer
Upgrade the System Software to the Latest Version on the Xerox Website.