Replace the Toner Cartridge
- Product support for
- AltaLink B8045 / B8055 / B8065 / B8075 / B8090 Multifunction Printer
- Article ID
- KB0028041
- Published
- 2019-11-21
NOTE: The images in this procedure are for demonstration purposes only and may not specifically match your printer model; colors, icons, and other minor differences may exist.
WARNINGS:
When replacing a toner cartridge, be careful not to spill the toner. If any toner spills, avoid contact with clothes, skin, eyes, and mouth. Do not inhale the toner dust.
Keep toner cartridges out of the reach of children. If a child accidentally swallows toner, have the child spit out the toner, and rinse out their mouth with water. Consult a physician immediately.
Use a damp cloth to wipe off spilled toner. Never use a vacuum cleaner to remove spills. Electric sparks inside the vacuum cleaner can cause a fire or explosion. If you spill a large volume of toner, contact your local Xerox representative.
Never throw a toner cartridge into an open flame. Remaining toner in the cartridge can catch fire and cause burn injuries or an explosion.
IMPORTANT: Place any suspected defective cartridge that is removed from the printer in protective wrapping/packaging material for situations where it may still be a functioning cartridge. If you do not have the original packaging material, use the packaging from the new cartridge.
A message appears on the control panel when a toner cartridge must be replaced.
Note: Each toner cartridge includes installation instructions.
To replace the toner cartridge:
Open the front door of the printer.
Rotate the orange toner cartridge locking lever anti-clockwise to release the toner cartridge.
Pull the toner cartridge straight out of the printer.
Remove the new toner cartridge from the packaging. Tilt the cartridge up and down, then left and right 10 times.
Push the new toner cartridge in slowly until it stops.
Rotate the orange toner cartridge locking lever clockwise to lock the toner cartridge into place.
Close the printer front door.