Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Fault Code 077-333: Invert In Gate Fail

Product support for
Xerox Versant 180 Press, Xerox Versant 280 Press, Xerox Versant 80 Press
Article ID
KB0015912
Published
2020-11-02

  1. Power off the Press. For details, refer to  Power On/Off the Press.

  2. Open the front left and center doors.




  3. Unlock and pull out the Transfer Drawer by turning the green 2 handle (at the center) to the right until it is in the horizontal position. Pull the drawer straight out until it stops.



  4. Power on the press with the Transfer Drawer still pulled out.

  5. When prompted by the machine to close the Transfer Drawer, close the drawer.

  6. Grasp the green 2 handle and gently push in the Transfer Drawer completely. Turn the green handle to the left to lock the drawer in place.

  7. Close the front left and center doors completely. The press will not operate if a door is open even slightly.

  8. Try your job agian. If the problem persists, contact Support.




    Related Content