Set up the Wireless Network Using the Easy Wireless Setting Program

When installing the printer, you can use the Xerox Easy Wireless Setup program to configure the wireless settings.

Disable WiFi Direct at the Control Panel

1. Press the [Machine Status] button.

2. Press the Up/Down arrows to select [Network] and press [OK].

3. If prompted, enter the Administrator Password using the alphanumerical keypad. The default is 1111.

4. Press the up/down arrows to select [Wi-Fi] and press [OK].

5. Press the up/down arrows to select [Wi-Fi Direct] and press [OK].

6. At the Wi-Fi On/Off menu, press [OK].

7. Confirm that Off is selected and press [OK] to save the settings.

To Open the Program on Windows PC:

1. Select Start>Xerox Printers > Xerox Easy Wireless Setup.
   
   Note: For Windows 7: Select Start > Programs or All Programs > Xerox Printers, and then select Xerox Easy Wireless Setup.
   
   

2. Connect the machine to your computer using the USB cable.
   
   Note: During installation, the printer needs to be temporarily connected using the USB cable.
   
   Note: You cannot use the Phaser 3052 / 3260, WorkCentre 3025 or WorkCentre 3215 / 3225 models on a wired and wireless network at the same time. If your printer is connected to the network with an Ethernet cable, unplug the cable.
   
   

3. Select Next.

4. Once the machine is connected to the computer with the USB cable, the program searches for WLAN data.

5. When the search is complete, the Select Wireless Network window displays. Select your network from the list.

6. Select Next. The Wireless Network Security screen displays.

7. Enter your Network Password and select Next.

8. At the Wi-Fi Direct Settings screen, uncheck the box next to Yes, I want to turn on Wi-Fi Direct on my printer.

9. Select Next.

10. Click Finish when the Wireless Network Setup Complete screen displays.