Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Digital Enablement

Product support for
Xerox AltaLink B8200 Series Multifunction Printers
Article ID
KB0413678
Published
2024-08-06

 

Instructions

 

Note:  The speed of the MFP must be configured through an enablement process during printer installation. If the machine is networked at first boot and can connect to the Xerox server, it will automatically create and download all Feature Installation Keys (FIKs) identified in the order.  If not connected, using the Software Activation Portal, or SWAP site, facilitates setting the printer speed and other parameters during the installation process.  To add Feature Installation Keys post install, follow the instructions identified below.

  1. Inside the front door, locate and note the machine serial number. For more information, refer to Find the Serial Number of the Printer
    Front Door

  2. Go to the Xerox Software Activation Portal. 
    Activation Portal

  3. Enter Machine Serial number and select the blue next button to begin generating the machine Feature Installation Key(s). 
    Machine Serial Number

  4. Enter the login credentials.

    • The default username is admin.

    • The default password is the device serial number. 
      Password and UI

  5. Touch the Device App.
    Device App

  6. Scroll to then touch General, scroll to then touch Feature Installation
    Features Installation

  7. Enter the Feature Activation Code noted in step 3, then touch OK.
    Feature Activation Code

  8. To add more features, repeat the procedure, then touch OK.
    Repeate the Procedure

  9. At the printer control panel, press the Power/Wake button, then touch Restart
    Power On and Off

  10. For later use, note the FIK Website URL, and follow documented steps for Feature Install Key look up.