Manually Add a Device to an Xerox App Account

1. Go to the Xerox App Gallery Web Portal. See the Related Content.

2. Log in to your account.

3. Select the Devices tab.

4. Click Add.
   
   Note: When you add a device to the Xerox App Gallery Web Portal for the first time, a message appears. The message asks for permission to install the Xerox Device Connector Add-on to Internet Explorer or the Chrome Extension.
   
   To enable communication between the Xerox App Gallery Web Portal and the device, ensure that the connector is installed and enabled on your Internet browser. To verify or enable the Xerox Device Connector add-on, refer to one of the following procedures:

5. • Internet Explorer: Verify or Enable Xerox Device Connector Add-on for Internet Explorer

   • Google Chrome: Verify or Enable the Chrome Extension for Xerox App Gallery
     
     If a message appears, allow the installation of the Xerox Device Connector Add-on or Extension.
      

6. Enter the Device IP Address or Hostname.
   
   Note: If you use the host name, ensure that it is the fully qualified host name.
   
   

7. Enter the SNMP V1 / V2 Community Name. The default setting is Private. 

8. Click Next.

9. On the second Add Device window, enter information for the following items:

   • Device Administrator User Name

   • Device Administrator Password

   • Contact Name for the device. This is optional.

   • Contact Email Address for the device. This is optional.
     
     

   Note: EIP Services are enabled by default on all devices. If you manually disable EIP Services, you will need to re-enable them. Use the Xerox CentreWare Internet Services or Xerox Embedded Web Server webpage for your device to re-enable EIP services.
   
   

10. Click Add. The Xerox device is added to your devices list.

Related Content

• Xerox App Gallery Web Portal

• Support for Xerox App Gallery