Replace Staples in the Booklet Maker Component in the BR Finisher
- Product support for
- PrimeLink C9065/C9070 Printer
- Article ID
- KB0384705
- Published
- 2019-10-01
To replace staples in the booklet maker component:
Open the front door of the business ready finisher.
Grasp the booklet maker handle, then pull the booklet maker toward you until the staple cartridges appear on the top edge of the module.
To remove the staple cartridge from the booklet maker, push down on the staple cartridge handle as shown. Pull the staple cartridge out and up.
Turn over the staple cartridge.
To permit the staple cartridge handle to open out and away from the staple refill container, press in the green tabs, then pull back the handle.
To remove the staple refill container, press the rear of the refill container as shown.
Replace the staple refill container, then return the staple cartridge to the booklet maker.