Empty the Trimmer Waste Container in the Crease and Two-Sided Trimmer

Emptying the Crease and Two-Sided Trimmer Waste Container

When the trimmer waste container nears a full condition, a status indicator illuminates on the top of the crease and two-sided trimmer.

Note: You can empty the waste container before it reaches a full condition, and while the printer is printing.

When the waste container reaches a full condition, the following changes occur:

• The indicator changes from a steady light to a blinking light.

• A message appears on the printer control panel indicating that the waste container is full.

To empty the trimmer waste container, do the following steps:

1. Open the lower door of the crease and two-sided trimmer.
   

2. Pull out and remove the waste container.
   

3. Discard all waste.

   Note: Ensure that the waste container is empty. If waste or debris remains in the container, the trimmer can malfunction.

4. To remove all waste and debris beneath the frame, use the cleaning rod to clean debris from inside the trimmer.
   
   
   

5. Return the cleaning rod to the original position inside the lower door.

6. Reinsert the waste container and push it in until it stops.
   

7. Close the lower door.