Production Ready Finishers - Media, Tray, and Staple Specifications

Product support for: Xerox Iridesse Production Press
Article ID: KB0369229
Published: 2018-05-04

Item	Specification
Tray	Top Tray	Collate and stack
	Stacker Tray	Collate (offsetting supported) and stack (offsetting supported)
	Booklet Tray	Collate and stack
Media Size	Top Tray	Standard Size	Minimum	Postcard (100 x 148 mm)
		Standard Size	Maximum	13 x 19 in., A3
		Custom Size	Height	98.0 - 330.2 mm
		Custom Size	Width	148.0 - 660.4 mm
	Stacker Tray	Standard Size	Minimum	5.83 × 8.27 in., A5
		Standard Size	Maximum	13 x 19 in., A3
		Custom Size	Height	148.0 - 330.2 mm
		Custom Size	Width	148.0 - 488.0 mm
	Booklet Tray	Standard Size	Minimum	JIS B5
		Standard Size	Maximum	13 x 19 in., A3
		Custom Size	Height	182.0 - 330.2 mm
		Custom Size	Width	257.0 - 488.0 mm
Stock Weight	Top Tray	52 - 350 g/m2
	Stacker Tray	52 - 350 g/m2
	Booklet Tray	60 - 350 g/m2
Tray Capacity	Top tray	500 sheets
	Stacker Tray (without staples)	8.5 x 11 in., A4	Production Ready Finisher: 3,000 sheets Production Ready Booklet Maker Finisher: 2,000 sheets
		JIS B4 or larger	1,500 sheets
		Mix Stack	350 sheets
	Stacker Tray (with staples)	8.5 x 11 in., A4	Production Ready Finisher: 200 sets or 3,000 sheets Production Ready Booklet Maker Finisher: 2,000 sheets
	Stacker Tray (with staples)	JIS B4 or larger	100 sets or 1,500 sheets
	Booklet Tray	20 sets
Note: The values are based on Colotech+90. "Mix stack" means a set of stock sheets where larger sheets are placed over smaller ones (for example, A4 over JIS B5, or JIS B4 over A4). The Booklet Tray capacity is 16 sets if one set consists of 17 or more sheets.
Staple	Capacity	100 sheets
	Note: The values are based on Colotech+90. 5 sheets (Larger than A4 / Letter (8.5 x 11")).
	Media Size	Standard Size	Minimum	5.83 × 8.27 in., A5
		Standard Size	Maximum	Tabloid (11 x 17 in.), A3
		Custom Size	Height	182.0 - 297.0 mm
		Custom Size	Width	148.0 - 432.0 mm
	Media Weight	Uncoated	52 - 350 g/m2
	Media Weight	Coated	72 - 350 g/m2
	Stapling Position	1 place, 2 places or 4 places

Item	Specification
Punch (with Punch Unit)	Media Size	Standard Size	Maximum	A3, Tabloid (11 x 17 in.)
			Minimum	2-hole or 3-hole	JIS B5
			Minimum	4-hole	A4,16K
		Custom Size	Height	203.0 - 297.0 mm
		Custom Size	Width	182.0 - 431.8 mm
	Media Weight	Uncoated	52 - 220 g/m2
		Coated	72 - 200 g/m2
	Number of Holes	2, 4-hole or US 2, 3-hole
		Note: The number of punch holes you can choose depends on the media size.
Saddle Stitch or Bi-Fold	Capacity		Saddle Stitch		30 sheets
Production Ready Booklet Maker Finisher	Capacity		Bi-Fold		5 sheets
	Note: The values are based on Colotech+90.
	Media Size	Standard Size	Maximum		A3, 13 x 19 in.
		Standard Size	Minimum		JIS B5
		Custom Size	Height		182.0 - 330.2 mm
		Uncoated	Width		257.0 - 488.0 mm
	Media Weight	Uncoated	60 - 350 g/m2
	Media Weight	Coated	2 - 350 g/m2

Production Ready Finishers - Staple Output Capacity

Media Weight (g/m2)	Side Stitch				Saddle Stitch
	A4 or Smaller		Larger than A4		Uncoated	Coated
	Uncoated	Coated	Uncoated	Coated	Uncoated	Coated
52 - 59	100	35*	65	35*	30*	25*
60 - 71		35*		35*	30	25*
72 - 80		35		35		25
81 - 90		35		35		25
91 - 105	50	30	50	30	20
106 - 128	50	30	45	30	15
129 - 150	20	20	20	20	10
151 - 176					10
177 - 220					5
221 - 256					4
257 - 300	10	10	10	10	3
301 - 350	10	10	10	10	3
* Can be stapled; however, binding accuracy or feed performance cannot be guaranteed. Values in the table indicating the maximum number of sheets that can be stapled were evaluated using the following paper types: 82 g/m2, Colotech+ (200 g/m2, 250 g/m2, 350 g/m2)

Important:

Jobs printed on recommended media where the number of pages is within the limits can still have staple faults depending on the following factors:
- Media type used (specifically, gloss coated stocks)
- Environment where the press resides (room temperature and humidity)
- Print data
In an environment at a low temperature and low humidity, the stapling of 40 sheets or more can cause paper jams.
Some coated stocks may have higher densities and resistance to stapler penetration, especially in cooler environments. In these cases, the maximum stapled set size may not be possible and an alternate coated stock my be required.

Note:

The press determines stock type and stock weight based on paper information set for the job, and not based on the stock actually loaded in the tray.
The press determines the number of sheets per job based on job information. Therefore, when multifeeds occur, stapling continues even if the number of sheets fed exceeds the limit. However, this event can cause staple faults.