Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Perform the Corotron Cleaning Routine

Product support for
Xerox Nuvera 100 Digital Copier/Printer, Xerox Nuvera 100MX DPS, Xerox Nuvera 100 Digital Production System, Xerox Nuvera 120 Digital Copier/Printer, Xerox Nuvera 120MX Digital Production System, Xerox Nuvera 120 Digital Production System, Xerox Nuvera 144 MX DPS, Xerox Nuvera 144 Digital Production System, Xerox Nuvera 200/288 MX Perfecting Production System, Xerox Nuvera 200/288/314 EA Perfecting Production System, Xerox Nuvera 100/120/144/157 EA Digital Production System
Article ID
KB0368329
Published
2021-10-06

  1. If jobs are waiting to print, you must click the [Pause] button on the DocuSP or FreeFlow Display Screen.

  2. From the DocuSP or FreeFlow Print Server Display Screen, select [User Diagnostics] from the System menu.

    NOTE: Depending on the software level, the selection for Corotron Cleaning Routine may be located under the sub-heading of Print Engine.

  3. Click [Corotron Cleaning Routine]. The Print Engine: Corotron Cleaning Routine window will be displayed with the default selected as 'All Cleaners', this is the correct selection.

  4. Click [Start].

    NOTE: The routine will take about 90 seconds to process. When the process is successfully completed a message will indicate (depending on your software level) 'Make a selection and press [Start] to begin', click on [Close], or [Complete]  to exit the routine. If the message 'Failed' is displayed, perform steps 1 through 3 again.

  5. Click [Close] to exit Diagnostics.

  6. Click [Resume] to process your jobs and make sure the image quality is okay.

  7. If image quality is not okay, follow the steps in this procedure again.