Configure LPR/LPD Settings Using CentreWare Internet Services (CWIS)

Note: If you are accessing Xerox CentreWare Internet Services for the first time after printer installation, you will be prompted to change the default Administrator Account password. The initial default password is the printer serial number. For additional information refer to Change the System Administrator Password for CentreWare Internet Services (CWIS).

The Line Printer Daemon (LPD) and Line Printer Remote (LPR) protocols provide printer spooling and network print server functionality for UNIX-based systems, such as HP-UX, Linux, and Macintosh.

Configuring LPR/LPD Using Xerox CentreWare Internet Services

Note: The images in this procedure are for demonstration purposes only and may not specifically match your printer model; differences in colors, icons, available tabs/menus and supported options/settings may exist.

1. From a computer (on the same network as the printer) open a Web browser.

2. In the Web browser address field, enter the IP address of the printer and then press Enter or Return. The CWIS home page will be displayed.
   
   
   
   

3. Click Properties.
   
   Note: Many features in CWIS require an administrator user name and password to access or modify. If prompted to enter Administrator Account login details:

   1. For User Name, enter Admin.

   2. For Password, enter the administrator account password that was set during initial access to CWIS.

   3. Click OK.
      
      

4. Click Connectivity.

5. Click Protocols.

6. Click LPR/LPD.

7. For Protocol, select Enable.

8. Type an LPR/LPD Port Number or use the default port number of 515.

9. Click Apply.