Calibrating Image Color

To calibrate image color:

1. At the printer Control Panel, log in as Administrator, press the Machine Status button, and touch the Tools tab.

2. Select Common Service Settings > Image Quality Adjustment > Calibration.

Read the directions on the Control Panel and follow the steps.

3. From the Calibration screen, select the Screen Type to calibrate.

Note

For optimal color, calibrate all four screen types.

4. Load A3, A4, 11” x 17” or 8.5” x 11” and choose the desired Paper Supply.

5. Select Start on the screen to print the calibration chart for the color correction.

6. Continue following the steps on the Control Panel.

7. To perform calibration, place the calibration chart face down with both magenta patches against the left edge of the document glass.

8. Place 5 sheets or more of blank white paper over the chart to prevent light from bleeding through the sheet.

9. Lower the document glass and select Start on the screen.

10. Select Confirm.

11. Select Target and specify whether the calibration should impact Copy and Print jobs, Copy Jobs Only, Print Jobs Only, or None.

12. Touch Save

13. Continue calibrating another screen type or touch Close.