Load Paper in the Oversized High Capacity Feeder (OHCF)
- Product support for
- Xerox Color C60/C70, Xerox Color EC70 Printer
- Article ID
- KB0329609
- Published
- 2021-01-19
NOTE: The OHCF is an optional feeder that can be purchased with one- or two-drawers. Each drawer holds up to 2,000 sheets.
To load the Oversized High Capacity Feeder (OHCF):
Open the OHCF.
Fan the paper before loading it into the tray.
Insert the paper into the tray, making sure to load the paper against the front, right side of the tray. Do not load paper above the maximum fill line.
Adjust the paper edge guide so that it just touches the edges of the stack.
Adjust the rear paper guide so that it just touches the edge of the stack.
Move both paper weight switches (inside the tray) to their appropriate positions.
NOTE: The paper weight switches work in conjunction with the blowers in the tray(s). The blowers help control environmental conditions in the paper trays and ensure optimum feed capability:
Each paper tray has two blowers and two fans. The blowers are located in the front of each tray, while the two fans are located on the right-side of the tray.
The lead edge blower is on at all times and produces heated air if one of the following selections are made: Coated paper, Transparencies, or plain paper, 106 g/m2 (29 lbs) or heavier. The trail edge blower is on at all times and does not produce heated air.
The paper trays also have air adjustment levers (switches) on the drawer to regulate the amount of air flow.
Move both paper weight switches (inside the tray) to their appropriate positions. Use one of the following settings:If the paper weight is between 60 and 256 g/m2, the position of the air adjustment levers (switches) should be toward the front of the tray.
If the paper weight is between 257 and 300 g/m2, the position of the air adjustment levers (switches) should be positioned toward the rear of the tray.
WARNING: For paper heavier than 256 g/m2 (67 lb), slide both switches to the heavier weight position; over 257 g/m2 (69 lb).Close the OHCF. When the tray is closed, the tray position is automatically adjusted in the front / back direction based on the paper size.
The Paper Tray Settings screen may be displayed on the Touch Screen. Select the [Change Settings] button if changes to the paper type or size have been made; otherwise, select [Confirm].