Load Paper Trays 1, 2, 3, and 4 and Configure the Tray Settings on the Touch Screen
- Product support for
- Xerox Color C60/C70, Xerox Color EC70 Printer
- Article ID
- KB0329449
- Published
- 2021-01-19
Paper Trays 1 and 2
Open the required paper tray.
Fan the paper before loading it into the tray.
Insert the paper into the tray and make sure it is positioned tightly against the left side of the tray. Do not load paper above the maximum fill line.
Adjust the paper edge guides so that they just touch the edge of the paper stack. To position the edge guides, squeeze the clamp mechanism on the guide and slide the guide to the edge of the paper.
Gently close the paper tray.
If you have changed the media type, select an option on the Control Panel touch screen:
To choose paper size, type, or color, touch Paper Supply.
To choose a specific paper stock, touch Paper Catalog.
Paper Trays 3 and 4
Open the paper tray.
Fan the paper before loading it into the tray.
Insert the paper into the tray, making sure it is positioned tightly against the left side of the tray. Do not load paper above the maximum fill line.
NOTE: Load pre-formatted paper, including letterhead and pre-printed paper, face-up with the top towards the front of the machine. Load hole-punched (drilled) paper with the holes on the trailing edge. Trays 3 and 4 cannot be used for envelopes or tabbed media. pMake sure the aper edge guide just touches the edge of the paper stack. To position the guide, squeeze the clamp mechanism on the guide and slide the guide to the edge of the paper.
Gently close the paper tray. When the tray elevator has risen, the paper tray is ready for use.
If you have changed the media type, select an option on the Control Panel touch screen:
To choose paper size, type, or color, touch Paper Supply.
To choose a specific paper stock, touch Paper Catalog.