Replace the Drum Cartridge

CAUTION: When handling a drum cartridge:

• Do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.

• Do not touch the surface of the photosensitive drum in the drum cartridge. Use the handle on the cartridge to avoid touching sensitive parts that can be easily damaged.

• Never manually rotate the drum in the drum cartridge, especially in the reverse direction; this can cause internal damage.

To Replace the Drum Cartridge:

1. Open the front cover.

2. Pull the toner cartridge out and place it on a clean flat surface.
   
   
   
   

3. Pull the drum cartridge out slowly.
   
   
   
   

4. Remove the new drum cartridge from the packaging. Follow directions on the packaging to remove the tape and appropriate packaging pieces from the new cartridge. Use the handle on the cartridge to avoid touching sensitive parts that can be easily damaged.

5. Hold the drum cartridge by the handle and insert it into the printer until it locks into place.

6. Re-install the toner cartridge.
   
   
   
   

7. Close the front cover.