Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Replace the Toner Cartridge

Product support for
Xerox B210 Printer
Article ID
KB0324906
Published
2020-07-01

WARNINGS:

  • When replacing the toner cartridge, be careful not to spill the toner. If any toner spills, avoid contact with clothes, skin, eyes, and mouth. Do not inhale the toner dust.

  • Keep toner cartridges out of the reach of children. If a child accidentally swallows toner, have the child spit out the toner, and rinse the mouth with water. Consult a physician immediately.

  • Use a damp cloth to wipe off spilled toner. Never use a vacuum cleaner to remove spills. Electric sparks inside the vacuum cleaner can cause a fire or explosion. If you spill a large volume of toner, contact your local Xerox representative.

  • Never throw a toner cartridge into an open flame. Remaining toner in the cartridge can catch fire and cause burn injuries or an explosion.

  • Use only genuine Xerox toner cartridges designed for specific use with this printer.

To Replace a Toner Cartridge:

  1. Open the front cover.

  2. Pull out the toner cartridge.

    Pull out the toner cartridge

  3. Remove the new toner cartridge from the packaging. Remove the protective materials from the cartridge as directed in the packaging labels.

  4. Slowly shake the new cartridge five or six times to distribute the toner evenly inside the cartridge.

    Slowly shake the new cartridge five or six times to distribute the toner evenly inside the cartridge

    Note: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

  5. Hold the cartridge by the handle. Slowly insert the cartridge into the opening in the printer. Tabs on the sides of the cartridge and corresponding grooves within the printer will guide the cartridge into the correct position until it locks into place.

    Hold the new cartridge by the handle, then install the cartridge

  6. Close the front cover. Make sure that the door is securely closed. When the green system status light is solid, the printer is ready.