Perform a Forced Hard Disk Drive (HDD) Format
- Product support for
- Xerox 700i/700 Digital Color Press, Xerox 770 Digital Color Press
- Article ID
- KB0324739
- Published
- 2015-07-22
CAUTION: When instructed to press multiple buttons, make sure to press the correct buttons all at the same time. An incorrect button combination may delete all customized printer settings.
Press the power switch to the off position (O). If the Power Save option is selected, the printer will immediately enter the Low Power Mode. If there are any jobs in the queue, a message will be displayed on the Touch Screen.
Press and hold down the [4] button on the numeric keypad, the [Energy Saver] and the [Stop] buttons simultaneously while powering on the machine. Continue to hold down the three buttons until the Touch Screen displays several lines, goes blank and then displays lines again.
Release the buttons. The machine will continue its normal boot up procedure to reset the HDD.