Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Install the Printer Software (Add a Printer) on a Computer With Apple Macintosh X (10.6.x) OS to Print Using TCP/IP With a Built-in or External EFI Fiery Color Server

Product support for
Xerox 700i/700 Digital Color Press, Xerox 770 Digital Color Press, Xerox Color C75 Press, Xerox Color J75 Press
Article ID
KB0323954
Published
2015-07-22

NOTE: These instructions assume that TCP/IP is configured on the Macintosh and on the printer. If the printer does not have an IP address, contact your System Administrator to provide one, or to perform this solution if you do not have rights to install a print driver.

To download and install the driver:

  1. If you have not already done so, download the print driver from [Drivers and Downloads] and extract the latest print driver files for this product and operating system to a known location on the hard drive.

  2. Browse to the location of the downloaded print driver.

  3. Double-click on the driver file. The contents of the file will be displayed.

  4. Double-click on the [Print Driver] folder. The contents of the folder will be displayed.

  5. Double-click on [OSX Installer]. The Authenticate window will be displayed.

    Mac Printer Driver OSX Installer selection screen snap

    NOTE: A warning message may be displayed that "OSX Installer is an application downloaded from the Internet." Click [Open] to open the installer and continue.

  6. Enter the username and password in the fields provided, and then click [OK]. The Software License Agreement window will be displayed.

  7. Read the agreement, and then click on [Accept] to continue. The OSX Installer window will be displayed.

    Mac License agreement screen snap

  8. Click on [Install]. The driver will install. When the installation is complete, an "Installation was successful" message will be displayed.

    NOTE: A Select Printer Version to Install window may be displayed. Click on [Fast] to continue the install. When the installation is complete, an "Installation was successful" message will be displayed.

  9. Click on [Quit] to complete the installation.

To add the printer:

  1. Click on the [Apple] icon in the upper, left corner of the toolbar, and then select [System Preferences] from the menu. The System Preferences window will be displayed.

    Mac System Preferences screen snap

  2. Double-click on [Print and Fax] folder. The Print and Fax window will be displayed.

    Mac Print & Fax screen snap

  3. Click on the [+] button on the left side of the window below the Printers field. A new window will be displayed.

  4. Click on the [IP] icon at the top of the window, and then select [Line Printer Daemon - LPD] from the Protocol pull-down menu.

    Mac IP configuration screen snap

  5. Enter the IP Address of the printer in the Address field, and then click on [Enter].

  6. Enter a queue name of print, hold or direct in the Queue field.

    NOTE: Using ‘print’ as the queue name will allow jobs to print immediately and save the job in the print queue. Using ‘hold’ as the queue name will cause jobs to be held at the Fiery server until they are released to print. Using ‘direct’ will cause jobs to print immediately and not be saved.

  7. Select [Select a driver to use…] from the Print Using pull-down menu. A list of printer models will be displayed.

  8. Select the correct printer model from the list, and then click on [Add]. The Installable Options list will be displayed.

  9. Select the installable options that are present on the printer, and then click on [Continue]. The printer will be displayed in the Printer List field.

    Mac Installable Options screen snap

    NOTE: If you are not sure what the options are, contact your System Administrator.

    NOTE: The default printer is indicated in the Printer List field. The last printer added will automatically be the default unless otherwise changed.

  10. Close the Print and Fax window and return to the desktop.

Install the Mac OS X Update file:

  1. If you have not already done so, extract the [Mac OS X Update] and extract the files to a known location on the hard drive.

  2. Open and read the Release Notes document carefully and then follow the instructions to successfully install a functioning print driver on Mac 10.6 .

  3. Click on the [Fiery Printer Driver Updater for 10.6] file to extract and install the driver update files. When the "All Fiery drivers have been updated successfully" message displays, the printer is now ready for use.