Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Empty the Hole Punch Waste Container in the Office Finisher LX

Product support for
WorkCentre 7830/7835/7845/7855
Article ID
KB0237698
Published
2018-04-27

When the Hole Punch Waste Container becomes full, a message will be displayed on the Touch Screen. Empty the container when this message is displayed.

CAUTION: When the Hole Punch Waste Container is emptied, make sure that all paper scraps are discarded; otherwise, the container will become full before the message stating to empty the container is displayed again. This can cause the printer to malfunction.

Make sure the container is emptied when the power is on. If the container is emptied when the power is off, the printer will not recognize that the container has been emptied.

  1. Make sure that the printer has stopped printing or copying, and then open the Finisher Transport Cover.

    Open Finisher Transport Cover

  2. Open the Front Transport Cover.

    Open Front Transport Cover

    NOTE: The covers are hinged and cannot be removed from the printer.

  3. Remove the Hole Punch Waste Container, located at R4, and then empty it completely.

    Remove Hole Punch Waster Container

  4. Insert the empty container all the way into the Finisher.

    Insert empty container into Finisher

  5. Close both covers completely. If the covers are not completely closed, a message will be displayed on the Touch Screen.