Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Empty the Hole Punch Waste Container in the Professional Finisher

Product support for
WorkCentre 7830/7835/7845/7855
Article ID
KB0237697
Published
2016-02-09

A message will be displayed on the Control Panel when the Hole Punch Waste Container becomes full.

CAUTION: When the Hole Punch Waste Container is emptied, make sure that all paper scraps are discarded; otherwise, the container will become full before the message stating to empty the container is displayed again. This can cause the machine to malfunction.

IMPORTANT: Make sure the container is emptied when the machine is powered on. If the container is emptied when the machine is powered off, the machine will not recognize that the container has been emptied.

  1. Make sure the machine has stopped copying / printing, and then open the Finisher Front Door.

    Open Finisher front door

  2. Pull out the Hole Punch Waste Container (R4).

    Pull out Hole Punch Waste Container

  3. Empty the container.

  4. Insert the container all the way back into the Finisher.

  5. Close the Finisher Front Door.