Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

The Fax Line is on the Back of the Controller

Product support for
WorkCentre 7328/7335/7345/7346
Article ID
KB0236521
Published
2016-12-13

The fax phone line connects to Fax Line 1 and to Fax Line 2 jacks (if a second fax line was purchased) on the back of the controller.

To insert the fax phone line:

  1. Depending on how the machine is positioned, either pull the bottom part of the printer out from underneath the Automatic Document Handler (ADH) stand or push the ADH stand straight back in order to access the back of the controller and the fax jack.

  2. Locate the controller, which is encased in a metal box on the back of the printer near the bottom.  Be careful the cables on the back of the printer do not disconnect.

  3. Insert the fax phone line into the appropriate fax jack in the back, lower center of the controller.  The jacks will be marked as Fax 1 and Fax 2.

    Fax Line 1

    Fax Line 2

  4. When the fax line has been inserted, gently return the printer to its original position. Make sure the cables do not get tangled or jammed inside the ADH stand.

  5. If necessary, configure the fax line with the fax number and company name.  See the Related Content for additional assistance.




    Related Content