Properly Power Down the Printer
- Product support for
- WorkCentre 7755/7765/7775
- Article ID
- KB0235437
- Published
- 2015-04-27
Press the power switch to the off position. The power switch is located on the right side of the Control Panel.
Wait for the green Energy Saver LED on the Touch Screen to stop flashing. This indicates printer has power off.
Power on the printer.
NOTE: In the event that the Energy Saver LED does not flash in step 2, wait at least 90 seconds before attempting to power on.
In the event that the printer is powered on while the Energy Saver LED is still flashing, wait at least 4.5 minutes until the printer powers on automatically. The printer needs to completely power off and for the hardware to timeout, before powering on.