Confirm That the Printing Ports Raw TCP/IP Printing and LPR/LPD are Properly Configured
- Product support for
- WorkCentre 5845/5855, WorkCentre 5865/5875/5890
- Article ID
- KB0221441
- Published
- 2020-01-03
Open a web browser and type the IP Address of the device in the address bar, Press Enter.
Note: The default user is admin (lower case), the default password is 1111.Click on Properties tab.
Enable LPR/LPD Port.
On the left side menu choose Connectivity to expand the menu.
Select Setup.
On the right side look for LPR/LPD and choose Edit on the right side.
Protocol should have a check mark showing enabled and port number should show 515.
If not enable and update the port and Apply.
Enable Raw TCP/IP Printing.
On the right side look for Raw TCP/IP Printing and click on Edit.
Protocol should have a check mark showing enabled and the port number should show 9100 for Port 1.
If not enable and update the port and Apply.