WorkCentre WC7220/7225: Power the Printer Off and On
- Product support for
- WorkCentre 7220/7225
- Article ID
- KB0220915
- Published
- 2018-02-16
The printer has two power switches: the main power switch located behind the Front Door, and the secondary power switch on the Lower Center Tray.
The main printer power is controlled by the main power switch. Main power should be left on for normal printer operation and should only be turned off when connecting a cable or when cleaning the printer.
Power off the printer:
NOTE: Wait five seconds after any job completes before powering the printer off.
Press the secondary power switch on the Lower Center Tray to the off position. Internal processing will take place before the printer shuts off.
NOTE: When the optional Office Finisher LX is attached, the power switch is located behind a clear plastic door in the Finisher Transport Cover / Center Tray.
Power off the printer using the main power switch:
CAUTION: Do not switch the main power off while a job is being processed or while the Energy Saver button is blinking. This may cause damage to the printer's internal hard drive or cause a printer malfunction.
Switch the main power off before unplugging the power cord. Unplugging the power cord with the main power on may damage the printer or cause a printer malfunction.
Do not switch main power off immediately after switching the secondary power switch off. Wait 10 seconds after the Touch Screen goes dark before turning off the main power.
Make sure the secondary power switch located on the Lower Center Tray is in the off position.
Open the Front Door.
Press the main power switch to the off position.
Close the Front Cover.
Power on the printer:
CAUTION: Switch the main power on first using the main power switch to avoid damaging the printer's internal hard drive or causing a printer malfunction. Do not switch the main power off immediately after switching it on. This may cause damage to the printer's internal hard drive or cause a printer malfunction.
Open the Front Cover.
Press the main power switch to the on position.
Close the Front Door.
Press the secondary power switch on the Lower Center Tray to the on position.
NOTE: When the optional Office Finisher LX is attached, the secondary power switch is located behind a clear plastic door in the Finisher Transport Cover / Center Tray.