Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Electrical and Environmental Specifications

Product support for
WorkCentre 5845/5855, WorkCentre 5865/5875/5890
Article ID
KB0220517
Published
2016-10-12
Electrical Requirements
and
Power Consumption
WC5845, WC5855
 

North America

Europe

Line Options

Dedicated
Recommended

Dedicated
Recommended

Voltage

110-127 VAC,
+/- 10%

220-240 VAC,
+/- 10%

Amperage

15 A

10 A

Frequency

50/60 Hz,
+/- 5%

50/60 Hz,
+/- 5%

Running (Average)

5845: 1,150 watts / hour
5855: 1,250 watts / hour

Standby Mode

290 watts / hour

Low Power Mode

less than or equal to
125 watts / hour

Sleep Mode

less than or equal to
4 watts / hour

Warm-up Mode

194 seconds

Low Power Recovery

< 9 seconds

Electrical Requirements
and
Power Consumption
WC5865, WC5875, WC5890
 

North America

Europe

Line Options

Dedicated Outlet

Dedicated
Recommended

Voltage

110-127 VAC,
+/- 10%

220-240 VAC,
+/- 10%

Amperage

20 A

10 A

Frequency

50/60 Hz, +/- 5%

Running (Average)

5865: 1,550 watts / hour
5875: 1,600 watts / hour
5890: 1650 watts / hour

Standby Mode

310 watts / hour

Low Power Mode

less than or equal to
160 watts / hour

Sleep Mode

less than or equal to
4 watts / hour

Warm-up Mode

194 seconds

Low Power Recovery

< 9 seconds

Additional Information:

  • Power source must be within six (6) feet  / 1830 mm of device.

  • Recovery from:

    • Power off time is 3 minutes 22 seconds (for both copy and print).

    • Sleep is less than 28 seconds.

    • Standby is under 10 seconds.

  • The convenience stapler option requires separate 110 Volt, 15 Amp circuit for North America.

  • No incremental power is required for any finisher options.

  • These products are Energy Star 2007 compliant, except Copier configurations.

Temperature
and
Humidity

Attribute

Specification

Required Temperature
Range

50o - 90o F
10o - 32o C

Required Relative
Humidity (RH)

10% - 85% RH

NOTE: Machine operates satisfactorily at altitudes up to 10,000 ft / 3,000 meters, but can be adjusted for high altitude in Tools settings on the machine.

Noise Levels *
(Not to Exceed)

Attribute

5845

5855

5865

5875

5890

Copier

Standby
dB (A) SPL

35

35

35

35

35

Run Continuous
dB (A) SPL

56

56

57

57

58

Run Impulse
dB (A) I. SPL

59

61

62

62

63

Copier / Printer

Standby
dB (A) SPL

35

35

35

35

35

Run Continuous
dB (A) SPL

56

56

57

57

58

Run Impulse
dB (A) I. SPL

59

61

62

62

63

* Noise levels listed are “Not To Exceed” levels.  Actual noise levels will be lower.