Print on Labels

Labels can be printed from Trays 2, 3, 4, 5 (Bypass Tray) and 6 (High-Capacity Feeder).

Guidelines

• Use labels designed for laser printing.

• Do not use vinyl labels.

• Do not use dry gum labels.

• Print only on one side of the sheet of labels.

• Do not use any sheet where labels are missing.

• Store unused labels flat in their original packaging. Leave the sheets of labels inside the original packaging until ready to use. Return any unused sheets of labels to the original packaging and reseal it.

• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing them in extreme conditions may cause print quality problems or cause them to jam in the printer.

• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and jam in the printer.

To Print on Labels

1. Load labels in the desired tray.

   • Load labels face-up in Trays 2, 3, and 4.

   • Load labels face-down in Trays 5 and 6.

2. In the print driver, on the computer, do one of the following:

   • Select "Labels" as the paper type.

   • Select the tray containing the labels as the paper source.

3. Send the job to the printer.