Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Enable HTTP/IPP on the WorkCentre

Product support for
CopyCentre 232/238, CopyCentre 245/255, CopyCentre 265/275, WorkCentre 232/238, WorkCentre 245/255, WorkCentre 265/275, WorkCentre Pro 232/238, WorkCentre Pro 245/255, WorkCentre Pro 265/275
Article ID
KB0216444
Published
2015-09-23

NOTE: HTTP/IPP is enabled by default on the machine.

  1. Press the [Access] or [AccessA] button on the Control Panel to enter the Tools Mode. The Login screen will be displayed.



  2. Enter your password using the numeric keypad on the Control Panel, and then select [Enter] on the Touch Screen. The Pathway Options screen will be displayed.

    NOTE: The default password is 1111. The password will be displayed as an asterisk (*). If you make a mistake, press the [Clear (C)] button on the Control Panel and re-enter the password. To cancel the operation, press the [Cancel] button. If you are experiencing problems with your password or have forgotten your password, contact your administrator.

  3. If the Internal Auditron is not enabled, select the [Go To Tools] button. If the Internal Auditron is enabled, select the [Tools Pathway] button.

  4. Select the [Connectivity and Network Setup] button.

  5. Select the [Network Setup] button.

  6. Select the [TCP/IP Options] button.

  7. Select the [HTTP/IPP] button.

  8. Select the [Enable] button.

  9. Select the [Save] button.

  10. Select the [Exit Tools] button.