Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Enable HTTP

Product support for
WorkCentre 3315/3325
Article ID
KB0139210
Published
2016-03-21

NOTE: HTTP is enabled by default.

  1. Press the [Machine Status] button on the Control Panel.

  2. Press the [Up] or [Down] arrow button until "Network Settings" is selected, and then press the [OK] button.

  3. If prompted, enter the Administrator password using the keypad, and then press the [OK] button. The default password is "1111".

  4. Press the [Up] or [Down] arrow button until "HTTP Activate" is selected, and then select "On".

  5. Press [OK]. The Saved screen will appear and then the Reboot Required screen will appear.

Re-power the printer:

  1. Press the Power Switch to the off (O) position. The Power Switch and the power cable socket are at the rear of the machine.

  2. Wait two seconds.

  3. Power the printer on.