Modify the Setting of a Program Number

1. Login as the System Administrator. See the Related Content for additional information.
   
   The Program Number Input screen will be displayed.
   
   At the top of the screen is the letter "P" followed by a series of 5 lines for Program Number entry.
   

2. Enter the required program number using the numeric keypad on the Control Panel.

3. Use the numeric keypad to enter the number that corresponds to the value for the setting you want to select.

4. Press the [Start] button to confirm the entered value.

5. Press the [Log In / Out] button to logout.
   
   NOTE: The Log In / Out button light goes off when the printer exits System Administration mode

Related Content

• Login or Logout as System Administrator